|
|
 |
 |
 |
 |
| |
Isolated safety with Rittal RiLine NH on-load isolators
4
July
2008
|
| |
Rittal RiLine NH on-load isolators provide safe, reliable isolation protection from down-stream electrical equipment. Available either with or without fuse monitoring, the isolators range from 100 to 630 amps (60mm), sizes 000 to 3 and can be easily mounted directly onto Rittal’s range of busbar systems.
Utilising either the electronic or electromechanical fuse monitoring allows quick fault diagnostics. If a fuse blows, a signal is immediately sent to advise of the need for quick replacement without effecting plant availability. The fitting of a micro switch indicates the switching position of the isolator lid to the control desk/room. The cable outlet may also be swapped from the top to the bottom using the same device thereby cutting warehouse costs by up to 50%.
To prevent unintentional opening of the isolator lid, all designs have a screwdriver-operated lock as standard; the lock position may also be sealed with sealing wire if preferred. A sliding window incorporated into the isolator lid contains a unique spring mechanism, which automatically closes the holes after voltage testing.
Further information:
John Wilkins
Marketing Services Manager
Tel: 01709 704000
e-mail: information@rittal.co.uk |
|
|
| |
FactoryEquipment.com are not responsible for the content of submitted or externally produced articles and images.
Click
here to email FactoryEquipment.com about any errors or omissions contained within this article. |
| |
|
|
|
|
|
|
